By using the Salin Plus Air Purifier, therapeutic effects including relief for asthma, bronchitis, and other respiratory allergies can be obtained. The Salin Plus Salt Therapy device works by having air constantly passing through the filter with micro-crystalline salts which creates a fine, constant spry of sodium chloride in the surrounding area, changing the ionization of the air.
Each Salin Plus Air Purifier comes with a Salin Plus Filter .This filter then needs to be replaced every 4 to 6 months depending on usage.
Some important tips on using Salin Plus
*Place your Salin Machine 2 to 3 meters from your bed but not near any open windows or ensuites.
* Turn on at a high setting 1 hour before bed and leave on all night
* Reduce the dial to a setting you are comfortable but we recommend to leave it on high if you are having respiratory issues
* Remember for best results use every night
* Salin Plus is a preventative and not a cure
* Never come off any medication you are on.
* Salin Plus can take up to 12 weeks to work on some people.
* Salin Plus can reduce the temperature of the room it is being used in
* Never use Salin Plus in a kitchen,damp room or ensuite
* Only use Salin Plus in a dry room with windows closed at all times even during the day
* By leaving a window open in a room moisture can get into the Salin Plus machine particularly during very humid or damp weather
* Salt is naturally hygroscopic meaning it will draw in moisture which can damage your machine
*Water will only leak from you Salin machine if it has been used in a damp room
What to do if you notice water or corrosion..
- Stop using your Salin machine immediately and plug out
- Remove the filter and dry out the machine completely
- Put your machine in a hotpress overnight to dry out
- Remember to keep the windows in the room while drying it out
- After approximately 2/4 days of your room drying out you should be able to use again but remember to keep windows closed to prevent this happening again
- Prolonged use of the Salin Machine in damp conditions will result in it getting damaged
We do not accept any responsibility for water or corrosion damaged machines